ENVIRONMENTAL CHEMICALS
www.ship-service.ru
DREWCLEAN 2000 - Quick Breaking Degreaser
Description
DREWCLEAN 2000 quick breaking degreaser is a clear, green, fresh scented, heavy duty degreaser, which is effective on fresh and aged oily soils on decks, bulkheads, and other surfaces. It can be used safely on painted and unpainted metal surfaces and contains no chlorinated solvents, carcinogens, or surfactants. DREWCLEAN 2000 degreaser has been tested and passed the Emulsion Separation Test per the IMO MEPC/Circ. 289, Information of Cleansing Agents for Use in Machinery Spaces of Ships.
DREWCLEAN 2000 quick breaking degreaser has been thoroughly tested and is approved by the following separating and bilge alarm manufacturers:
• Inventive Systems, Inc.
• National Fluid Separators, Inc.
• SEREP Company
• Separation and Recovery Systems
• World Water Systems
Other important approvals for DREWCLEAN 2000 quick breaking degreaser include:
• DREWCLEAN 2000 degreaser meets Alyeska Pipeline
Service Company requirements, as evaluated by U.S. EPA
Test Methods, as a cleaning agent used to clean tank vessels that discharge ballast water and bilge water to the Ballast Water Treatment Facility in Valdez, Alaska and which may be used to clean cargo or fuel tanks and bilges of tankers in the Alaska North Slope crude oil trade.
• The Port of Portland, Oregon U.S.A. has approved
DREWCLEAN 2000 degreaser as a tank cleaner to be used with waste water or oil that is to be received by the Ballast Water Treatment Plant.
|
Features |
Benefits |
|
Effective cleaner |
Minimizes time and cleaning effort |
|
Quick breaking |
Improves separator oil removal process Does not harm separator |
|
Contains no surfactants |
Reduces slop storage |
|
Clear, fresh scented cleaner |
Pleasant to use |
|
Non-corrosive |
Safe for use on painted and unpainted surfaces and ferrous and non-ferrous metals including aluminum and its alloys |
Application and Use
DREWCLEAN 2000 quick breaking degreaser should be used undiluted and applied directly to soiled surfaces by brushing, wiping or spraying. Allow to soak in for 10-20 minutes, then hose rinse with fresh or salt water. Where pressure rinsing is not possible, use a sponge to apply rinse water. For use in dip pans or for parts cleaning, soak parts in full strength DREWCLEAN 2000 degreaser until the soils are softened. Remove, rinse with water, and wipe with a clean cloth. For cleaning deck plates, tank tops, machinery, bilges and for general deck and engine room maintenance, spray full strength on contaminated surfaces and allow to soak. Hose off with fresh or salt water.
Typical Physical Properties
Appearance: Clear, green liquid
Scent: Sassafras
Specific Gravity at 25° C (77° F): 0.790
Flash Point (PMCC): 62° C (146° F)
Aromatic content: Less than 0.5%
Packaging
DREWCLEAN 2000 quick breaking degreaser is available in 25-liter containers.
Important Information
Ashland maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Ashland products in your facilities.