MAINTENANCE CHEMICALS
www.ship-service.ru

ENVIROMATE 2000 - General Purpose Cleaner

Description

ENVIROMATE 2000 general purpose cleaner is a new generation water-based cleaner formulated to meet the marine industry’s strict requirements for safety and performance. ENVIROMATE 2000 general purpose cleaner with its unique blend of cleaning agents is a non-flammable, general purpose cleaner perfect for a broad range of deck, offshore, hotel and galley applications. This product is also perfect for a broad range of ultrasonic cleaning applications. ENVIROMATE 2000 general purpose cleaner has been evaluated by the IMO Bulk Liquids and Gases (BLG) Working Group on the Evaluation of Safety and Pollution Hazards of Chemicals (ESPH) and found to meet the requirements of Paragraph 1.8.2 of the Procedures & Arrangements Standards and is listed on the IMO MEPC.2/CIRC.11. Only cleaners listed on the IMO MEPC.2/CIRC.11 can be used for cargo tank cleaning when cargo residue slops are disposable at sea.

Application and Use

For General Cleaning and Degreasing

Apply ENVIROMATE 2000 general purpose cleaner as a 5 to 25% solution to soiled surface by brushing, swabbing, or spraying. Allow ENVIROMATE 2000 general purpose cleaner to penetrate and work into the soil for several minutes, scrub, then rinse with water to provide a clean, film-free surface. ENVIROMATE 2000 general purpose cleaner works best when used with warm water 40-60 °C (104-140 °F). Testing with a three-stage laboratory model oily water separator charged with 1.34% of #2 fuel oil resulted in an actual oil content of <15 ppm when ENVIROMATE 2000 general purpose cleaner did not exceed 1,250 ppm. Under these conditions, up to 1.21 liters of ENVIROMATE 2000 general purpose cleaner can be used per 1,000 liters of bilge water to achieve <15 ppm oil. Because shipboard oily water separator systems and conditions vary from ship to ship, this information is offered as a guideline only.

For Ultrasonic Cleaning

Use ENVIROMATE 2000 general purpose cleaner as a 20% solution in fresh water for all types of ultrasonic cleaning. Heating of the solution to 50-70° C (123-158° F) is required for best results. Cleaning time required varies from 10-30 minutes for filters, though more heavily fouled parts may take longer. It is recommended to preclean parts and remove heavy dirt and grease/oil before placing in the cleaning solution. This will also enhance the active lifetime of the product. For more detailed information on your cleaning needs, contact your local Drew Marine representative.

SUGGESTED APPLICATIONS

Deck Hotel Galley

Soot stains Crew quarters Mess area, tabletops, floors

Cleaning of bulkhead Showers, toilets, sinks Grills, ovens, bulkheads,

counter tops, refrigeration room

Tank tops, decks, tools Floors, bulkheads Ventilator fan blades, louvers

and exhaust housing surfaces

Deodorizing tanks Decktops, portholes

Precleaning prior to painting

Typical Physical Properties

Appearance: Clear, light blue liquid

Specific Gravity: 1.03

pH Full Strength: 8.6

Flash Point: N/A

Rinsability: Free-rinsing

Solubility: Complete in fresh or seawater

Freeze/Thaw Stability: Stable

Odor: Fresh, clean odor

NOTE: Always wear the appropriate safety equipment when using this product.

Packaging

ENVIROMATE 2000 general purpose cleaner is available in 25-liter containers.

Important Information

Ashland maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.

Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Ashland products in your facilities.