ENVIRONMENTAL CHEMICALS
www.ship-service.ru
SNC 2000 - Carbon Remover
Description
SNC carbon remover is a clear, blue, pine-scented, hydrocarbon solvent blend specially designed to remove baked on and carbonized soils on valves, burner tips and other engine parts. SNC carbon remover does not contain any hazardous cresylic acid or chlorinated solvents. It has a pleasant odor and does not require a water layer to prevent vaporization.
|
Features |
Benefits |
|
High solvency |
Penetrates and softens stubborn carbon deposits and varnishes |
|
Contains no cresylic acid or chlorinated Hydrocarbons |
Safer for the user Safer for the environment Non-corrosive to most metals |
|
Pine-scented Requires no water seal |
Pleasant to use Simple cleaning process minimizing water spotting and corrosion |
|
High flash point |
Can be heated for greater cleaning efficacy in tough cleaning applications |
Application and Use
SNC carbon remover penetrates deposits and dissolves oil, grease, varnish and combustion products. Insoluble materials (carbon, soot, ash, dirt) are softened so they can easily be removed with a water rinse.
SOAKING METHOD
Place the parts to be cleaned in a pan or drum of suitable size with enough SNC carbon remover to cover. Small parts may be put into a wire basket for easy removal and recovery. Allow to soak until deposits are completely dissolved or loosened (usually 4 to 8 hours). Remove and rinse with water. Some small amounts of deposit that remain can be removed by light brushing. Dry with a cloth or compressed air. For heavy or tenacious deposits, agitation will assist in the cleaning.
For carbonized deposits, heat the solvent to 55° - 60° C (130° - 140° F). Allow parts to stand in the solution until the deposits loosen (up to 24 hours). Remove and rinse with a stream of water. Brush lightly if necessary. Dry with a cloth or compressed air.
BRUSH METHOD
For in-place cleaning of large, heavy pieces, SNC carbon remover can be applied with a brush. Continue brushing with SNC carbon remover until deposits are saturated, loosened and removed. Sponge or spray with water to rinse, then dry with a cloth.
Typical Physical Properties
Appearance: Clear, blue liquid
Scent: Pine
Specific Gravity at 25° C (77° F): 0.965
Flash Point (PMCC): 77° C (170° F)
Packaging
SNC carbon remover is available in 25-liter containers
Important Information
Ashland maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Ashland products in your facilities.